Teledyne LeCroy WavePro Automation Command - Manual (Page 631)

Automation Command and Query Reference Manual - Processor Reference
SigLevelType Enum
Sets/Queries which level to use "Percent" or "Absolute" for transitions on the signal
Description
Values
Absolute
Percent
PercentGNDMax
PercentGNDMin
PercentPkPk
SigPercentLevel Double
From 0 to 100 step 1 Range
Sets/Queries the test level for the signal in percent.
Description
SigSlope Enum
Sets/Queries the polarity of the measured signal transitions.
Description
Values
Both
Neg
Pos
PROTOCOL2ANALOG
app.Measure.Px.Operator (ParamEngine = "Protocol2Analog")
AddressOperator Enum
AddressValue BitPattern
AddressValue2 BitPattern
FilterType Enum
FindLevel Action
Hysteresis Double
LevelType Enum
PatternBitLength Integer
PatternBitPos Integer
PatternOperator Enum
PatternValue BitPattern
PatternValue2 BitPattern
PercentLevel Double
Slope Enum
ViewingMode Enum
2-132
918501 RevA