Teledyne LeCroy WavePro Automation Command - Manual (Page 230)

Automation Command and Query Reference Manual - Control Reference
ShowMask Bool
If a standard has been selected (other than "Custom"), then at least one mask (possibly many)
defined for that standard can be shown, and used for mask testing. This cvar controls whether the
selected mask for Eye (and Eye2, if in a dual eye mode) are shown. When true,
app.SDA2.EyeMeasure.ShowMaskFailures can be set, or app.SDA2.EyeMeasure.ShowFailLocation
can be set.
Description
ShowMaskFailures Bool
ShowMaskFailures enables a simple mask test, it looks at the accumulated Eye Diagram and draws
red circle cursors around any sample that violates the mask. This can help make a single dot failure
much more noticable. This is simply a visual result. For automation, you should also see the
MaskHits and MaskOut parameter results; and for a more sophisticated mask test that can stop on
failure and show the time domain near each failure, see app.SDA2.EyeMeasure.ShowFailLocation.
Note: Unlike ShowFailLocation, which allows you to limit the information collected, ShowMaskFailures
will try to draw a red circle around every dot that is on top of the mask's exclusion regions. Even
though drawing a few cursors is fast, drawing tens of thousands of cursors takes a number of
seconds. If there are many failures, you probably don't need ShowMaskFailures - the failures are
clearly visble. If you do turn it on in such a case, be prepared to wait several seconds every time it
needs to redraw tens of thousands of red circles.
Description
ShowSimpleEye Bool
SliceWidth Integer
From 0 to 100 step 1 Range
SliceWidth is the width of the region considered by Eye parameters such as EyeHeight, One level, and
Zero level. This region is centered at the middle of the Eye (and Eye2, if in a dual eye mode).
Description
StopOnFail Bool
EYE app.SDA2.EyeMeasure.Eye
AxisXRotation Integer
AxisYRotation Integer
ClearSweeps Action
LabelsPosition String
LabelsText String
Persist3DQuality Enum
PersistDotJoined Bool
Persisted Bool
Persistence3d Bool
PersistenceMonoChrome Bool
PersistenceSaturation Integer
PersistenceTime Enum
ShowLastTrace Bool
UseGrid String
1-216
918501 RevA