Teledyne LeCroy WavePro Automation Command - Manual (Page 365)

Automation Command and Query Reference Manual - Control Reference
PCIeStandard Enum
The PCIe Signal Quality (electrical compliance) test can be selected for PCIE 1.0a or PCIE 1.1
Description
Values
PCIExpress1.0a
PCIExpress1.1
ShowPCIeMeasure Bool
When this control is set to True, the measurement set selected in PCIeMeasurement is calculated
and displayed.
Description
PARAMETERS app.SDA2.PCIe.Parameters
PCIeTestGroup Enum
This control selects either PCIeMeasurements (see that, on the previous page) or the Signal Quality
test (electrical compliance test).
Description
Values
PCIEMeasurement
PCIESignalQuality
PCIeTestGroup Enum
SD2SKEW app.SDA2.PCIe.Parameters.SD2Skew
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
View Bool
Sets/Queries the trace's 'Viewed' state. When true, the trace is displayed on one of the display
graticules. Note that even when a trace is not visible, it may be used as a source for Math, Measure,
etc.
Description
ClearSweeps Action
View Bool
RESULT app.SDA2.PCIe.Parameters.SD2Skew.Out.Result
1-351
918501 RevA