Teledyne LeCroy WavePro Automation Command - Manual (Page 32)

Automation Command and Query Reference Manual - Control Reference
FindScale Action
Starts FindScale operation for this chanel. This operation will adjust channel's v/div and offset control
such that the signal is visible on the screen with in +/- 3 div.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
'Find vertical scale of channel 1
app.Acquisition.C1.FindScale
Example
InterpolateType Enum
Sets/Queries the type of interpolation used for input channel Cx. Note that Sinx/x interpolation
increases the size of the trace by a factor of 10, beware when using this option with long records.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set the interpolation for channel C3 to (sin x)/x
app.Acquisition.C3.InterpolateType = "Sinxx"
Example
Values
Linear Linear interpolation
Sinxx Sinx/x interpolation
Invert Bool
Sets/Queries whether input channel Cx is inverted.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set channel C2 to be inverted.
app.Acquisition.C2.Invert = True
Example
1-18
918501 RevA