Teledyne LeCroy WavePro Automation Command - Manual (Page 23)

Automation Command and Query Reference Manual - Control Reference
TriggerMode Enum
Sets/Queries the trigger mode, using values from the following list -
Auto, Norm, Normal, Single, Stopped.
Auto: After a timeout, if a real hardware trigger is not received, then force a trigger so there are
automatically lots of updates.
Normal: Accepts triggers as rapidly as the system permits, but likewise will wait "forever" for a trigger,
without updating anything.
Single: Arm the acquisition system to acquire once, and do not rearm automatically after. Once a
trigger is received and the data processed, the instrument finishes in the "Stopped" state.
Stop: Finishes the current acquisition and does not re-arm.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Place the instrument in stopped mode and take one acquisition.
app.Acquisition.TriggerMode = "Stopped"
app.Acquisition.Acquire(5)
Example
Values
Auto Auto-trigger
Normal Normal Trigger
Single Single Trigger
Stopped No trigger possible, Stopped
AUXIN app.Acquisition.AuxIn
Auxiliary trigger input properties.
Attenuation Enum
Attenuation factor for the auxiliary input connector.
Description
Values
Div10
x1
Attenuation Enum
Coupling Enum
ProbeAttenuation Double
ProbeName String
1-9
918501 RevA