Teledyne LeCroy WavePro Automation Command - Manual (Page 603)

Automation Command and Query Reference Manual - Processor Reference
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
HighPct Double
From 60 to 90 step 1 Range
High level in percent.
Description
LowPct Double
From 10 to 40 step 1 Range
High level in percent.
Description
Aperture Double
HighPct Double
LowPct Double
EYESDEVNOISE
app.Measure.Px.Operator (ParamEngine = "EyeSDEVNoise")
Aperture Double
From 0 to 100 step 0.1 Range
For eye-diagram parameters which have an "aperture" setting, this defines the region over which the
eye digrams vertical information is analyzed.
It specifies the percentage of the central region of the eye (relative to 1 Unit Interval) which is used in
the analysis.
Description
Aperture Double
Level Enum
2-104
918501 RevA