Teledyne LeCroy WavePro Automation Command - Manual (Page 460)

Automation Command and Query Reference Manual - Control Reference
ActualResolutionBandwidth Double
From 0.1 to 1e+011 step 0.1 Range
Read-only control which reflects the current resolution bandwidth.
Note that this may differ from the ResolutionBandwidth control in cases where the user-requested
resolution bandwidth cannot be achieved.
Description
AutoResolutionBandwidth Bool
If set to TRUE, the resolution bandwidth will be automatically determined, based on 1/1000th of the
frequency span requested.
Description
CenterFreq Double
From 100 to 1e+010 step 100 Range
Spectrum center frequency.
Description
Enable Bool
Enable/Disable Spectrum Analyzer mode.
Description
ENBW Double
From 0.1 to 10 step 0.001 Range
Readout of the current Equivalent Noise Bandwidth (ENBW).
Description
AutoResolutionBandwidth Bool
CenterFreq Double
Enable Bool
ENBW Double
MarkerToCenterFreq Action
MaxFrequency Double
MaxPeaks Integer
Mode Enum
ReferenceFreq Double
ReferenceLevel Double
ResolutionBandwidth DoubleLockstep
ShowPeakTable Bool
Source Enum
SpanFreq Double
SpanMode Enum
VerticalScale DoubleLockstep
Window Enum
1-446
918501 RevA