Teledyne LeCroy WavePro Automation Command - Manual (Page 628)

Automation Command and Query Reference Manual - Processor Reference
HighPct Double
From 60 to 90 step 1 Range
High level in percent.
Description
LowPct Double
From 10 to 40 step 1 Range
High level in percent.
Description
PHASE
app.Measure.Px.Operator (ParamEngine = "Phase")
OutputType Enum
Sets/Queries the output type for Phase Px.
Description
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
' Set parameter P1 to phase difference.
app.Measure.P1.ParamEngine = "Phase"
' Set the output unit as radians.
app.Measure.P1.Operator.OutputType = "Radians"
Example
Values
Degrees
DEGREES360
Percent
Radians
RADIANSTWOPI
OutputType Enum
RefFindLevel Action
RefHysteresis Double
RefLevelType Enum
RefPercentLevel Double
RefSlope Enum
SigFindLevel Action
SigHysteresis Double
SigLevelType Enum
SigPercentLevel Double
SigSlope Enum
2-129
918501 RevA