Teledyne LeCroy WavePro Automation Command - Manual (Page 209)

Automation Command and Query Reference Manual - Control Reference
Deskew4 Action
Initiate a deskew calibration of Channel 4.
(Note that this action pops up an interactive wizard, which requires a user to manually dismiss)
Description
DeskewCalRef Enum
This specifies the signal source used for DC and skew calibrations. When the TF-DSQ fixture is
plugged into a scope input, the scope will automatically specify this fixture as the calibration source.
Description
Values
C1
C2
C3
C4
EXT
Gain1 Double
From 0.8 to 1.2 step 0.001 Range
Gain2 Double
From 0.8 to 1.2 step 0.001 Range
Gain3 Double
From 0.8 to 1.2 step 0.001 Range
Gain4 Double
From 0.8 to 1.2 step 0.001 Range
Offset1 Double
From -1e+012 to 1e+012 step 1e-012 Range
Offset2 Double
From -1e+012 to 1e+012 step 1e-012 Range
Offset3 Double
From -1e+012 to 1e+012 step 1e-012 Range
Offset4 Double
From -1e+012 to 1e+012 step 1e-012 Range
1-195
918501 RevA