Teledyne LeCroy WavePro Automation Command - Manual (Page 339)

Automation Command and Query Reference Manual - Control Reference
AxisXRotation Integer
From -90 to 90 step 1 Range
AxisYRotation Integer
From -90 to 90 step 1 Range
This control is used only when Persisted is true and Persistence3d is true. It controls rotation about
the Y axis of the view being persisted.
Description
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
LabelsPosition String
Any number of characters Range
Sets / Queries the horizontal position of the label attached to the acquisition trace Cx. The unit of
measurement is the unit of the horizontal scale. The measurement is made from the trigger point.
Note that this control is a string, not a numeric value. This allows multiple labels to be positioned, as
shown in the example below.
Description
LabelsText String
Any number of characters Range
Persist3DQuality Enum
This control only has an effect when Persisted is true and Persistence3D is true. It controls whether
the 3D view is shown as a wire frame (which can be monochrome or color graded), a solid (also can
be monochrome or color graded), or a shaded solid (always monochrome). For WireFrame or Solid,
if monochrome the brightness increases with height; if color graded the color changes from puple to
red with height. "Shaded" present the solid as if it were lit from the upper left.
Description
Values
Shaded
Solid
WireFrame
UseGrid String
View Bool
ViewLabels Bool
1-325
918501 RevA