Teledyne LeCroy WavePro Automation Command - Manual (Page 474)

Automation Command and Query Reference Manual - Control Reference
Values
EO Log errors only
FD Log all remote commands/queries
OFF Turn the assistant off
Interface Enum
Sets/Queries the currently selected type of currently selected remote control interface.
Description
Values
LXI
Off
TCPIP
RestrictControl Enum
Sets/Queries whether remote control is restricted to certain hosts, where the host name is defined
either by IP address, or dns name.
Description
Values
No
Yes
SetToErrorsOnlyAndClearAtStartup Bool
Enable the resetting of the remote assistant to 'Errors Only' mode when the instrument is reset. Also
ensure s that the remote assistant log is cleared upon startup.
This control is set by default to lower the risk that the remote assistant will be set to 'Full Dialog' mode
and be forgotten, causing a decrease in remote control performance.
Description
CIOPORTU3GPIB app.Utility.Remote.IOManager.CIOPortU3GPIB
GpibAddress Integer
From 1 to 30 step 1 Range
GpibAddress Integer
CLSIBPORT app.Utility.Remote.IOManager.CLSIBPort
WAVESCAN app.WaveScan
This is the root of the WaveScan automation hierarchy.
1-460
918501 RevA