Teledyne LeCroy WavePro Automation Command - Manual (Page 178)

Automation Command and Query Reference Manual - Control Reference
' Visual Basic Script
Set app = CreateObject("LeCroy.XStreamDSO")
app.Measure.MeasureMode = "MyMeasure"
' Set parameter P1 to math on parameters.
App.Measure.P1.MeasurementType = "math"
Example
FindLevel Action
FindRange Action
GateByRange Bool
If True, only measurements who's value(s) fall between the limits defined by the LowerLimit and
UpperLimit controls, are accepted.
Description
GateByWform Bool
If True, measurements are gated by the state of the waveform defined by the WformSource control.
Description
GateStart Double
From 0 to 10 step 0.01 Range
Sets/Reads the position of the left hand edge of the measure gate for parameter Px.
Description
GateStop Double
From 0 to 10 step 0.01 Range
Sets/Reads the position of the right hand edge of the measure gate for parameter Px.
Description
GateByWform Bool
GateStart Double
GateStop Double
HelpAlwaysOn Bool
LevelType Enum
LowerLimit Double
MeasurementType Enum
ParamEngine Enum
PassWhen Enum
PercentLevel Double
Source1 Enum
UpperLimit Double
1-164
918501 RevA