Teledyne LeCroy WavePro Automation Command - Manual (Page 541)

Automation Command and Query Reference Manual - Processor Reference
Center the slice about the center of the axis, Vertical or Horizontal, depending upon the CutDirection
Setting.
Description
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
CutDirection Enum
Specifies either a " vertical" cut direction or "horizontal" cut direction producing a histogram with
the same horizontal coordinates as the chosen direction.
Description
Values
Horizontal
Vertical
VerCutCenter Double
From -1.79769e+308 to 1.79769e+308 step 0 Range
Horizontal coordinate of center of cut or slice from the persistence map (in horizontal units)
Description
VerCutWidth Double
From -1.79769e+308 to 1.79769e+308 step 0 Range
Horizontal coordinate of center of cut or slice from the persistence map (in horizontal units)
Description
PERSISTENCETRACEMEAN
app.Math.Fx.OperatorYSetup (Operator = "PersistenceTraceMean")
ClearSweeps Action
Clear any accumulated result data. Useful for example to restart an average, or parameter statistics.
Description
NumPoints Integer
From 100 to 100000 step 1 Range
ClearSweeps Action
NumPoints Integer
PERSISTENCETRACERANGE
app.Math.Fx.OperatorYSetup (Operator = "PersistenceTraceRange")
2-42
918501 RevA