ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 114)

TempTrend CSV
6
Figure 5-3. Com Port Error
This error is typically due to one of two reasons, either:
1. The System is not connected and powered on. In which case simply connect the
System, power it on and try again.
or
2. You have a non-standard Microsoft installation. In which case you must specify the
Com Port to use.
To find out which port is being used, look inside “Device Manager”. You will select the
Com Port that matches your USB-Serial Adaptor.
Figure 5-4. Device Manager Display
Select the communications port for your System cable connection. Click on the button
“Com Port” and select the appropriate one of the ports listed.
600479-001 Rev 2 114/147