ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 79)

Operation
48
Figure 4-58. Patient Data Message.
7. Choose “Download Now.”
8. The screen displays the message “Prepare data link.”
Figure 4-59. Prepare Data Link Message.
9. Connect one end of a serial interface cable to the laptop computer’s
serial interface connector.
10. Attach the other end of the cable to the serial interface connector on the
System. The male 9-pin subminiature “D” connector is located on the
rear of the control head.
600479-001 Rev 2 79/147