ZOLL Thermogard XP IVTM System Operation Manual User Manual
Page 83
Advertising
Operation
52
Figure 4-63. Prepare Data Link Message.
4.
Connect one end of a serial interface cable to the laptop computer’s
serial interface connector.
5.
Attach the other end of the cable to the serial interface connector on the
System. The female 9-pin subminiature “D” connector is located on the
rear of the display head.
Figure 4-64. Location of the Serial Interface Connector.
6.
Start the TempTrend program on the laptop computer. Refer to Chapter
5 – TempTrend CSV.
7.
If a problem occurs during downloading, the System screen will display
the message “Download error. Please check external computer.”
Check the serial cable connections and the operation of the laptop
600479-001 Rev 2 83/147
Advertising