ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 115)

TempTrend CSV
7
HINT: It is safe to just try each port setting offered within TempTrend™ CSV until
you find the one that works. TempTrend™ CSV will not allow you to select a port
that is not connected to the System. You will simple receive a warning message as
per Figure 5-3.
Select File
Click on this icon to:
1. Select the directory into which you want to save the data logs. The default
directory is: C:\TempTrendCSV Data
Figure 5-5. Select File Dialog Box
2. You can either select an existing file name or create a new one.
 To select an existing file name, double click on it. All existing data within the
file will be over written with the new download.
 To enter a new file name, replace the *.csv with the file name of your
choosing. Type it in place of the *.csv in the file name box.
Figure 5-6. Fully Qualified File Name Displayed
The full path name of the patient data log file that you selected is displayed above the
Select File icon.
600479-001 Rev 2 115/147