ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 61)

Operation
30
Figure 4-29. Select Treatment Mode Message.
15. Turn the knob to highlight the desired mode. Press the knob once to
enter the selection. Controlled rate should not be selected when using
the Cool Line catheter.
16. If you select “Controlled Rate” for the Treatment Mode, you will be
prompted to “Select Rate. Press Enter to Set”. Use the knob to scroll
through to the desired rate and then press the knob to select it.
Figure 4-30. Select Rate Screen
17. If the System has not yet finished its self tests, the Self-Test screen is
displayed.
600479-001 Rev 2 61/147