ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 31)

Receiving, Inspection & Assembly
7
Power Cord
7. Plug the female end of the power cord into the recessed power inlet
connector. Wrap the power cord around the two cord hooks on the rear
of the console.
Condensate Pan
8. Remove the condensate pan from its packaging and install it in the slot
under the front of the console (refer to figure 8-1).
Saline Container Insulating Jacket
9. Remove the saline container insulating jacket from its packaging and
hang it on the saline container hook.
Assembly is complete.
600479-001 Rev 2 31/147