The scroll control – ZOLL Thermogard XP IVTM System Operation Manual User Manual

Page 118

Advertising
background image

TempTrend

CSV

10

The Scroll Control

Figure 5-10.

The Scroll Control Dialog Box

The Scroll Control is divided into four layers:

1.

The location layer

2.

The zoom layer

3.

The scroll layer

4.

The Close Button

To close the Scroll Control click the Close Button.

Location

There are two boxes in the upper layer of the Scroll Control. On the left is a text box.
Enter the offset in minutes of the section of the patient data log that is of interest to you.
Then click the right hand box with the X in the center of the scroll symbols (>>X<<). The
Scroll Control will center the graph, at your existing zoom, with the entered value in the
center of the graph.

If you are already at MAX zoom, there will be no change in the display.

Zoom

The X axis of the graph will be scaled depending upon which of the buttons in the middle
layer of the Scroll Control that you click.

If you are at MAX zoom, clicking on one of the three other buttons will result in the graph
remaining centered where it is and the span of the graph being modified to either 4 hours,
12 hours or 24 hours. The graph will not move beyond the ends of the graph by more
than half the width of the displayed window.

Scroll

There are two buttons in the scroll layer of the Scroll Control. Clicking on the left hand
facing triangle will scroll the graph half a zoom distance to the left (i.e. to earlier in the
record). Clicking on the right hand facing triangle will scroll the graph half a zoom
distance to the right (i.e. to later in the record). The graph will not move beyond the ends
of the graph by more than half the width of the displayed window.

600479-001 Rev 2 118/147

Advertising