ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 46)

Operation
15
Settings Menu
The settings menu allows you to modify the information displayed on the
operating display. It appears as in Figure 4-11.
Figure 4-11. System Settings Menu
The options offered by the settings menu are listed and described below.
Table 4-4. System Settings Menu
Hi/Lo Alarms Allows you to modify the low (Lo) and high (Hi) patient temperature alarms.
Time and Date Allows you to modify the System time and date.
°C / °F Allows you to toggle between displaying temperatures in degrees Celsius
or degrees Farhenheit.
Bath Pre-Set Allows you to set the system to either HEAT or COOL during STANDBY.
Language Allows you to select the display language.
Standby Timer Provides you with a warning alarm after the system has been in STANDBY
for either 15 or 60 minutes. This alarm can be deactivated.
Exit Returns to the operating display.
NOTE :
There is no Pump Rate Selection in ZOLL XP systems.
ZOLL has validated that the Cool Line catheter can be safely used at a
pump rate of 240 ml/min.
600479-001 Rev 2 46/147