ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 81)

Operation
50
14. After about two seconds, System Set Up screen displays the message
“Set up system now. Press Enter to proceed.”
15. Disconnect the serial interface cable from the System and the laptop
computer.
Downloading of patient trend data is now complete. To set up the System for a
new patient, return to the section in this chapter titled Preparing the System for
Treatment.
CAUTION! There is no “Undelete”
If you choose “Delete,” the patient’s trend data will be permanently deleted
and cannot be recovered later.
600479-001 Rev 2 81/147