ZOLL Thermogard XP IVTM System Operation Manual - Manual (Page 60)

Operation
29
Figure 4-27. Delete Previous Patient Data
12. The System Set Up screen then displays the message “Select Target
Temp.”
Figure 4-28. Select Target Temp Message.
13. Turn the knob until the target patient temperature is displayed. When the
desired value is displayed, press the knob once to enter the selection.
14. The System Set Up screen displays the message “Select Treatment
Mode” Note that you have three choices: “Max Power”, “Controlled
Rate” or “FEVER”.
600479-001 Rev 2 60/147