Sony DAR-X1R - Manual (Page 119)

Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
GB
119
Colour System
Selects the colour system when playing VIDEO
CDs (including Super VIDEO CDs)/DivX video
files.
Auto Display
Screen Saver
The screen saver image appears when you do not
use the recorder for more than 10 minutes while an
on-screen display, such as the System Menu, is
displayed on your TV screen. The screen saver
image helps prevent your display device from
becoming damaged (ghosting).
Audio Settings (Audio)
The “Audio” setup allows you to adjust the sound
according to playback and connection conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “SETUP,” and press .
3
Select “Audio,” and press .
The “Audio” setup appears with the following
options. The default settings are underlined.
Audio DRC (Dynamic Range Control) (DVDs
only)
Selects the dynamic range (difference between
soft and loud sounds) setting when playing a DVD
that conforms to Audio DRC. This affects the
output from the following jacks:
– LINE 1 – TV jack
– LINE 3/DECODER jack
– Subwoofer SPEAKER jack
b Note
Audio DRC is applicable to Dolby Digital sources only.
PAL Plays a disc in PAL colour
system.
NTSC Plays a disc in NTSC colour
system.
On Automatically displays
information on the screen when
the recorder is turned on, etc.
Off Displays information only
when DISPLAY is pressed.
On Turns on the screen saver
function.
Off Turns off the function.
Off No compression of dynamic
range.
Standard Reproduces the sound track
with the kind of dynamic range
that the recording engineer
intended.
Max Compresses dynamic range
fully.
,continued