Sony DAR-X1R - Manual (Page 122)

GB
122
7
Select “Yes” or “No” using </,, and
press .
The measurement is OK.
The distance and audio level of the front
speaker (L) and (R), and the audio level of the
subwoofer are displayed.
Disconnect the calibration mic, then select
“Yes.” The result is implemented.
b Note
Depending on the acoustics of the room, the
displayed distance may not represent the actual
distance.
The measurement is not OK.
Follow the message, then select “Yes” to
retry.
8
Press SYSTEM MENU repeatedly to turn off
the display.
b Note
While the “Auto Calibration” function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not disconnect the calibration mic.
To turn off the “Auto Calibration” function
1
Press OPTIONS to select “Audio Settings,”
and press
.
2
Select “Auto Calibration Mode,” and press
.
3
Select “Off,” and press .
z Hints
• If you change the position of the speakers, perform
“Auto Calibration” again.
• After performing “Auto Calibration,” “Auto
Calibration Mode” switches to “On” automatically.