Sony DAR-X1R - Manual (Page 62)

GB
62
The default host channel setting is set to
“Automatic,” so you should not have to change the
host channel setting. However, if you are using
connection B (page 33) and you want to receive
the programme guide data from your set top box
receiver, or if there is no sound or if the picture is
distorted, search for the host channel on the
following website and set it for your area,
following the steps below:
www.europe.guideplus.com
1
Press TV GUIDE.
The GUIDE Plus+ system appears.
2
Select “Setup” in the Menu Bar.
The GUIDE Plus+ setup menu appears.
3
Select “Host Channel Setup” using M/m,
and press
.
4
Press the yellow button (“Change”) twice.
“Manual” appears.
5
Select “Source” using ,.
6
Press the yellow button (“Source”)
repeatedly to select the input source.
7
Select “Prog. No.” using ,.
8
Enter the programme position number
using the number buttons.
9
Press the green button (“Save”).
The display asks for confirmation.
10
Select “Confirm” using </,, and press
.
The display returns to the GUIDE Plus+ setup
menu.
11
Wait one day until the programme guide
data can be received.
To cancel the settings
Press the red button (“Back”).
To return to the “Home” position
Press the blue button (“Home”).
The cursor returns to the home position on the
“Grid.”
To check the GUIDE Plus+ system information
1
Press TV GUIDE.
2
Select “Setup” in the Menu Bar, and press .
3
Select “GUIDE Plus+ system Information”
using
M/m, and press .
Check whether programme position numbers are
the same as the programme position numbers set
in the “Channel Setting.”
If you want to make adjustments to the channel
settings or change the channel name, see “Channel
Setting” in “Settings and Adjustments”
(page 112).
1
Select “Editor” in the Menu Bar, and press
.
2
Press , to move the cursor to the right
column.
Changing the GUIDE Plus+ host
channel
Checking programme positions