Sony DAR-X1R - Manual (Page 67)

Ti
m
e
r Re
cor
d
in
g
GB
67
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically adjusts the
recording mode to enable the entire programme to
be recorded. Set “Rec Mode Adjust” of the “Timer
Settings” to “On” in the “Recording” setup
(page 123).
Auto Title Erase (HDD only)
If there is not enough space for a timer recording,
the recorder automatically erases old titles
recorded on the HDD.
The oldest played title is erased. Set “Auto Title
Erase” of the “Timer Settings” to “On” in the
“Recording” setup (page 123). Protected titles are
not erased.
If the timer settings overlap
If one or more timer settings overlap, a message
appears. To change the timer settings, see
“Checking/Changing/Cancelling Timer Settings”
on page 71.
z Hint
If you are recording to the HDD or a DVD-RW (VR
mode) at a recording mode that is SP or lower and is a 2x
speed or higher disc, you can play the title as it is being
recorded by selecting the programme title on the Title
List (page 80).
b Notes
• If a message indicating that the disc is full appears on
the screen, change the disc, or make available space for
the recording (HDD/DVD+RW/DVD-RW only)
(page 93).
• The last recording mode you selected manually
becomes the default recording mode for timer
recordings made from the GUIDE Plus+ system.
• You cannot adjust the recording quality (HDD or
DVD) once the recording starts.
• The beginning of some recordings may not be made
when using the PDC/VPS function.
• You cannot extend the recording duration time when
“PDC/VPS” is set to “On” (page 72).
The ShowView system is a feature that simplifies
setting the timer. Just enter the ShowView
programming number listed in the TV programme
guide. The date, time, and programme position of
that programme are set automatically.
Check that the programme positions are correctly
set in “Channel Setting” in the “Basic” setup
(page 112).
1
With the GUIDE Plus+ system turned off,
press SCHEDULE.
2
Press the red button (“ShowView”).
3
Press the number buttons to enter the
ShowView programming number.
• If you make a mistake, press < and re-enter
the correct number.
Recording TV programmes using
the ShowView system
x REC STOP
Colour
buttons
SCHEDULE
Number
buttons
</M/m/,,
,continued