Sony DAR-X1R - Manual (Page 50)

GB
50
5. Changing the Name of a
Recorded Programme
You can label a DVD, title, or programme by
entering characters. You can enter up to 64
characters for a title or disc name, but the actual
number of characters displayed in the menus such
as the Title List will vary. The steps below explain
how to change the name of the recorded
programme.
1
Press TITLE LIST.
2
Select a title, and press .
The sub-menu appears.
3
Select “Title Name,” and press .
The display for entering characters appears.
4
Press INPUT SELECT to switch between
“A” (upper-case), “a” (lower-case), or
“Symbol.”
The characters for the selected type are
displayed.
5
Press </M/m/, to select the character
you want to enter, and press
.
The selected character appears at the top of
the display.
Example: Input Title Name
The type of characters will change according
to the language you select in “Easy Setup.”
Some languages allow you to enter an accent
mark.
To enter a letter with an accent mark, select an
accent followed by the letter.
Example: Select “ ` ” and then “a” to enter “à.”
To insert a space, select “Space.”
6
Repeat steps 4 and 5 to enter the
remaining characters.
To erase a character, move the cursor to the
right of the character at the input row. Select
“Back” and press
.
To insert a character, move the cursor to the
right of the point where you want to insert the
character. Select the character and press
.
To erase all of the characters, select “Clear
All” and press
.
7
Select “Finish,” and press .
To cancel the setting, select “Cancel.”
+ RW -RW VR -RW
Video
-R VR
+ R HDD
-R
Video
</M/m/,,
Number
buttons
INPUT
SELECT
TITLE LIST
Input row