Sony DAR-X1R - Manual (Page 80)

GB
80
When the sound does not match the pictures on the
screen, you can adjust the delay between the
picture and sound.
1
Press OPTIONS during playback to select
“Audio Settings,” and press
.
2
Select “A/V SYNC,” and press .
3
Select “On,” and press .
b Notes
• When dubbing to a VCR or other video recording
equipment, be sure to set “A/V SYNC” to “Off.”
• The “A/V SYNC” does not effect when playing sound
from the LINE 3 DIGITAL IN (OPTICAL) jack.
You can pause a current TV broadcast, and then
continue watching the programme at a later time.
This is useful when you receive an unexpected
phone call or visitor while watching TV.
1
While viewing a TV broadcast with this
recorder, press X.
The picture pauses. You can pause the picture
for up to three hours.
2
Press X or H again to resume watching
the programme.
b Notes
• Paused titles are not saved to the HDD.
• This function is cancelled when:
– x (stop) is pressed.
– PROG +/– is pressed.
– DVD is pressed.
– FM/AM is pressed.
– Z (open/close) on the recorder is pressed.
– TITLE LIST is pressed.
– INPUT SELECT is pressed.
– the recorder is turned off.
– a timer recording or Synchro-Recording is started.
– the PDC/VPS function is “On” and channel scan is
started.
– DV dubbing or regular dubbing is started.
• It may take one minute or more to resume playback of
the paused programme.
• Even if you fast forward the recorded programme,
there will always be a time difference of about one
minute or more between the recorded programme and
the current TV broadcast.
“Chasing Playback” allows you to view the
recorded part of a programme while the recording
is being made. You do not need to wait until the
recording finishes.
Press OPTIONS while recording to select
“Chasing Playback,” and press
.
Playback starts from the beginning of the
programme you are recording.
When you fast forward to the point that you are
recording, Chasing Playback returns to normal
playback.
b Notes
• For DVD-RWs (VR mode), this function does not
work when recording:
– on a 1x-speed DVD-RW.
– in the HQ or HSP recording mode.
• The DVD’s picture on your TV screen freezes for a few
seconds when you fast forward/fast reverse or instant
replay/advance the recording.
• Chasing Playback is possible from one minute or more
after recording starts.
• Even if you fast forward the recorded programme,
there will always be a time difference of about one
minute or more between the recorded programme and
the current TV broadcast.
Adjusting the delay between the
picture and sound (A/V SYNC)
Pausing a TV Broadcast (TV Pause)
+ R
DVD VCD
-RW VR -RW
Video
+ RW HDD
DATA DVD DATA CD
-R VR
-R
Video
TV pause
Playing from the beginning of the
programme you are recording
(Chasing Playback)
HDD -RW VR