Sony DAR-X1R - Manual (Page 63)

G
U
ID
E
Pl
us
+ (av
a
ilab
le
on
ly
i
n
ar
eas
w
ith
G
U
ID
E Pl
us
+ s
e
rv
ic
e)
GB
63
3
Select the programme position you want to
check using M/m.
To change the input source, press the red
button (“Source”).
To change the programme position, see
“Channel Setting” on page 112.
b Note
To receive from the recorder a programme position that
can be received by either the set top box receiver or the
recorder, change the input source in step 3.
If any programme positions are unused or contain
unwanted channels, you can hide them.
For instance, if you are using your set top box
receiver to receive programme data (connection B,
page 33), all receivable programme positions are
displayed. Use this function to hide any unwanted
programme positions.
1
Select “Editor” in the Menu Bar, and press
.
2
In the left column, select the programme
position you want to hide or display using
M/m.
3
Press the red button (“On/Off”).
The disabled positions will turn grey.
To show the disabled positions, press the red
button (“On/Off”) again.
b Notes
• You cannot record a programme position, if it is not set
in “Channel Setting” of “Settings and Adjustments,”
even if it is set to “On” in the “Editor” in the Menu Bar.
• If you are using your set top box receiver to receive
programmes (connection B, page 33) and are able to
receive the same programme with both the set top box
and the recorder, change the “Source” to receive the
programme with the recorder’s tuner.
Disabling programme positions