Sony DAR-X1R - Manual (Page 132)

GB
132
The subtitle language cannot be changed or
turned off.
, Multilingual subtitles are not recorded on the
DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the titles
recorded on this recorder.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, You are trying to change the angles when “ ”
does not appear on the TV screen (page 76).
, The DVD VIDEO prohibits changing angles.
, Try changing the angle using the DVD VIDEO’s
menu.
, The angles cannot be changed for the titles
recorded on this recorder.
, The angles cannot be changed during slow
motion playback or when playback is paused.
The DivX video files do not play.
, The file is not created in DivX format.
, The file has an extension other than “.avi” or
“.divx.”
, The DATA CD (DivX video)/DATA DVD
(DivX video) is not created in a DivX format that
conforms to ISO 9660 Level 1/Level 2 or Joliet.
, The DivX video file is larger than 720 (width) ×
576 (height).
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
format that the recorder can play (page 83).
The JPEG image files do not play.
, The JPEG image files are not recorded in a
format that the recorder can play (page 83).
, Progressive JPEG images cannot be played.
TV Pause does not work.
, You are recording to the HDD or the HDD is full.
The programme position cannot be changed
from the programme position you are
recording.
, Set the TV’s input source to “TV.”
Recording does not start immediately after you
press z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFO WRITE” disappears
from the front panel display.
Nothing was recorded even though you set the
timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to a
power failure that lasted for more than 1 hour.
Reset the clock (page 116).
, The channel was disabled after the timer
recording was set. See “Channel Setting” on
page 112.
, The programme position was hidden after the
timer recording was set. (See “Making changes
to the GUIDE Plus+ System” on page 61.)
, Disconnect the mains lead from the mains, and
connect it again.
, “PDC/VPS Scan Off” was selected in the
OPTIONS menu (page 72).
, The programme contains copy protection signals
that restrict copying.
, Other timer setting overlapped the timer setting
(page 72).
, There is no DVD inside the recorder.
, There is not enough disc space for the recording.
, The set top box was turned off.
, The set top box controller was incorrectly
connected (page 14).
, The settings in “Setup” in the Menu bar of the
GUIDE Plus+ system have been changed
(page 61).
, The recorder was in the process of dubbing
(HDD yDVD).
, The recorder was in the process of DV Dubbing.
Recording does not stop immediately after you
press x REC STOP.
, It will take a few seconds for the recorder to input
disc data before recording can stop.
Recording/Timer recording/
Editing