Sony DAR-X1R - Manual (Page 35)

H
ook
up
a
nd Set
tings
–AD
VAN
CED
–
GB
35
Setting Up Your Set Top Box
Receiver for the GUIDE
Plus+
®
System (available
only in areas with GUIDE
Plus+ service)
Follow the steps below to set up your set top box
receiver for the GUIDE Plus+ system. Note that
the OSD language, Clock, Country and Postal
Code are all set for the GUIDE Plus+ system when
Easy Setup is completed.
1
Press TV GUIDE.
The GUIDE Plus+ system “Home Screen”
appears.
2
Select “Setup” in the Menu Bar using M/
,, and press .
The GUIDE Plus+ setup menu appears.
3
Select “Basic Setup” using M/m, and
press .
4
Select “External Receiver 1,” and press
.
You can also select “External Receiver 2” or
“External Receiver 3” if you have connected
additional set top box receivers.
5
Press to select “Continue.”
6
Select the set top box receiver type using
M/m, and press
.
7
Select the provider using M/m, and press
.
If you select “None,” you can select a receiver
brand from a list of all available brands.
8
Select the receiver brand using M/m, and
press .
If your receiver brand is not on the list, select
“???.”
The receiver brand list is automatically
updated, so your receiver may be available at
a later date. Select your brand when it
becomes available. Until then, use “???.”
9
Select the connection you used for your set
top box receiver using M/m, and press .
When the set top box receiver is connected to
the recorder using hookup A, select
“Antenna.” When the set top box receiver is
connected to the recorder using hookup B,
select “Line3.”
The display asks for confirmation.
10
Press to select “Continue.”
The Video Window switches to the specified
programme position.
11
Select “YES” using M/m, and press .
The display asks for confirmation.
If the Video Window does not switch to the
specified programme position, select “NO”
and press
until the Video Window
switches to the specified programme position.
If you cannot get the recorder to control your
set top box receiver
Check the connection and position of the set top
box controller (page 34).
If your set top box receiver still does not operate
with this recorder, refer to the instructions
supplied with your set top box receiver and
contact your cable or satellite company to see if
they can provide you with a compatible set top box
receiver.
TV GUIDE
</M/m/,,
,continued