Sony DAR-X1R - Manual (Page 94)

GB
94
4
Select point B using m / M , and press
.
Playback pauses.
5
Press if point B is correct.
If point B is incorrect, select point B using
c/C, and press
. The display asks for
confirmation.
• To reset point A, press
M and O RETURN,
and go to step 2.
• To reset point B, press M and repeat step 4.
• To preview the title without scenes to be
erased, select “Preview” (except for
DVD+RWs).
6
Select “OK,” and press .
The scene is erased. The display for setting
point A appears.
• To continue, go to step 2.
• To finish, select “Quit.”
z Hint
A chapter mark is inserted after the scene was erased.
The chapter mark divides the title into separate chapters
on either side of the mark.
b Notes
• Images or sound may be momentarily interrupted at the
point where you erase a section of a title.
• Sections shorter than five seconds may not be erased.
• For DVD+RWs, the erased section may be slightly
different from the points you selected.
If you want to dub a long title to a disc but do not
want to reduce the picture quality, divide the title
into two shorter titles. Note that dividing a title
cannot be undone.
* Only playlist titles can be divided for DVD-RWs/
DVD-Rs (VR mode).
1
Press TITLE LIST.
Press < / , to switch the Title Lists, if
necessary.
2
Select a title, and press .
The sub-menu appears.
3
Select “Divide,” and press .
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title, press
X and then press ..
4
Select the dividing point by pressing m/
M
, and press .
Playback pauses.
5
Press if the dividing point is correct.
If the dividing point is incorrect, select the
dividing point using c/C, and press
.
The display asks for confirmation.
• To change the dividing point, press
M .
6
Select “OK,” and press .
The title is divided in two.
z Hint
After a title is divided, the title name prior to division is
assigned to both the first and second parts.
Dividing a title (Divide)
-RW VR HDD -R VR
* *