Sony DAR-X1R - Manual (Page 68)

GB
68
4
Press .
The TIMER REC indicator lights up on the
front panel.
The date, start and stop times, programme
position, etc. setting appear.
When the message to enter the programme
position appears, select the programme
position using
</M/m/,, and press .
The recorder is ready to start recording.
• To record on a DVD
See “Checking/Changing/Cancelling Timer
Settings” on page 71.
• To make more detailed timer settings
See “Checking/Changing/Cancelling Timer
Settings” on page 71.
To confirm, change, or cancel a timer
recording
See “Checking/Changing/Cancelling Timer
Settings” on page 71.
To stop recording during timer recording
Press x REC STOP located beneath the remote
control cover.
Note that it may take a few seconds for the
recorder to stop recording.
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically adjusts the
recording mode to enable the entire programme to
be recorded. Set “Rec Mode Adjust” of the “Timer
Settings” to “On” in the “Recording” setup
(page 123).
Auto Title Erase (HDD only)
If there is not enough space for a timer recording,
the recorder automatically erases old titles
recorded on the HDD.
The oldest played title is erased. Set “Auto Title
Erase” of the “Timer Settings” to “On” in the
“Recording” setup (page 123). Protected titles are
not erased.
1
With the GUIDE Plus+ system turned off,
press SCHEDULE.
2
Press the green button (“Manual”).
3
Set the date using the number buttons and
</M/m/,. Then press the green button
(“Next”).
4
Set the start time using the number buttons
and </M/m/,. Then press the green
button (“Next”).
5
Set the stop time using the number buttons
and </M/m/,. Then press the green
button (“Next”).
Setting the timer manually
</M/m/,,
SCHEDULE
z REC
Colour
buttons
Number
buttons
x REC STOP