Connecting to the line 3 digital in (optical) jack – Sony DAR-X1R User Manual
Page 37
H
ook
up
a
nd Set
tings
–AD
VAN
CED
–
GB
37
Connecting to the LINE 3 DIGITAL IN (OPTICAL) Jack
Connect a digital satellite receiver or similar device to the LINE 3 DIGITAL IN jack and i LINE 3/
DECODER jack of this recorder, and set “Line 3 Input” to “Optical In” in the “Audio” setup (page 120).
You can enjoy digital sound from the connected speakers.
b
Notes
• Audio signals from the i LINE 3/DECODER jack are recorded even when “Line 3 Input” is set to “Optical In” in
the “Audio” setup.
• The “A/V SYNC” does not effect when connecting to the LINE 3 DIGITAL IN (OPTICAL) jack. Set the “A/V
SYNC” or corresponding function of your set top box receiver. Refer to the instruction manual supplied with the set
top box receiver.
Digital satellite
receiver, etc.
Optical digital cord
(not supplied)
DVD recorder
: Signal flow
to LINE 3 DIGITAL IN
(OPTICAL)
SCART cord (not supplied)
to
i
LINE 3/DECODER