Sony DAR-X1R - Manual (Page 123)

Se
tti
n
gs an
d Adj
u
st
m
e
n
ts
GB
123
Recording Settings
(Recording)
The “Recording” setup allows you to adjust
recording settings.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select “SETUP,” and press .
3
Select “Recording,” and press .
The “Recording” setup appears with the
following options. The default settings are
underlined.
HDD Rec. Settings
Bilingual Recording
Selects the sound to be recorded on the HDD.
b Note
If you change the recording mode while dubbing from a
DVD to the HDD, the sound recorded in the source
(DVD) is applied regardless of this setting.
HQ Setting
Selects the HQ mode used for recording on the
HDD (page 64).
DVD Rec. Settings
Bilingual Recording (for all recordable discs
except DVD-RWs/DVD-Rs in VR mode)
Selects the sound to be recorded on the recordable
disc. This setting is not necessary when recording
on DVD-RWs/DVD-Rs (VR mode) that record
both the main and sub sounds.
Timer Settings
Rec Mode Adjust
Auto Title Erase (HDD only)
TV Direct Rec (HDD/DVD+RW/DVD-RW/
DVD+R/DVD-R only)
Main Records the main sound for the
bilingual programme.
Sub Records the sub sound for the
bilingual programme.
Main+Sub Records the main and sub
sounds for the bilingual
programme.
HQ+ Records in higher quality
(approximate 15 Mbps).
HQ Records in the standard HQ
mode.
Main Records the main sound for the
bilingual programme.
Sub Records the sub sound for the
bilingual programme.
On Automatically adjusts the
recording mode to enable the
entire programme to be
recorded (page 67).
Off Turns off the function.
On Automatically erases old titles
recorded on the HDD
(page 67).
Off Turns off the function.
On Allows you to easily record
what you are watching on the
TV using SMARTLINK.
Off Turns off the TV Direct Rec
function.
,continued