Sony DAR-X1R - Manual (Page 27)

H
ook
up
s
and
Se
tti
n
gs
–
BASI
C–
GB
27
Step 4: Easy Setup
Make the basic adjustments by following the on-
screen instructions in “Easy Setup.”
1
Turn on the system and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The initial settings message appears.
• If this message does not appear, select “Easy
Setup” from “SETUP” in the System Menu
(“Settings and Adjustments” on page 112).
2
Press .
Follow the on-screen instructions to make the
following settings.
Easy Setup - OSD
Select a language for the on-screen displays.
Easy Setup - Tuner System
Select your country/region or language.
The programme position order will be set
according to the country/region you set.
To set the programme positions manually, see
page 112.
• If you live in a French speaking country that
is not listed on the display, select “ELSE -
English.”
Easy Setup - Postal Code (areas with GUIDE
Plus+ service only)
Enter your postal code using the number
buttons or
</M/m/,, and press .
To erase a number, move the cursor to the
number.
Note that the option for entering your Postal
Code only appears if you select one of the
following tuner systems in the step above:
UK, B, NL, D, E, I, CH, A.
For details on the tuner system, see page 112.
Easy Setup - Clock
The recorder will automatically search for a
clock signal. If a clock signal cannot be found,
set the clock manually using
</M/m/,, and
press .
Easy Setup - TV Type (page 117)
If you have a wide-screen TV, select “16:9.” If
you have a standard TV, select either “4:3
Letter Box” (shrink to fit) or “4:3 Pan Scan”
(stretch to fit). This will determine how “wide-
screen” images are displayed on your TV.
Easy Setup - Component Out
If you are using the COMPONENT VIDEO
OUT jack, select “On.”
Easy Setup - Line3 Input
If you plan to connect a decoder such as a
PAY-TV/Canal Plus analogue decoder to the
LINE 3/DECODER jack, select “Yes.”
Easy Setup - Line1 Output
To output video signals, select “Video.”
To output S video signals, select “S Video.”
To output RGB signals, select “RGB.”
Select “Video” to enjoy the SMARTLINK
features.
• If you set “Easy Setup - Component Out” to
“On,” you cannot select “RGB.”
• If you set “Easy Setup - Line3 Input” to
“Yes,” you cannot select “S Video.”
3
Press when “Finish” appears.
“Easy Setup” is finished.
[/1
</M/m/,,
O RETURN
TV GUIDE
(Areas with GUIDE Plus+ service only)
To receive GUIDE Plus+ system data your
recorder must be turned off when not in
use. If your recorder is connected to a set
top box receiver, be sure to leave the set
top box receiver turned on. After initial
setup, it may take up to 24 hours to begin
receiving TV programme listings.
,continued