Playback – Sony DAR-X1R User Manual
Page 131
Addi
tiona
l I
n
fo
rm
at
io
n
GB
131
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
, Check the speaker connections and settings
, Press SOUND FIELD repeatedly to switch to
“FOCUS SUR” when playing a CD with DTS
sound tracks.
, Depending on the DVD, the output signal may
not be the entire 5.1 channel. It may be monaural
or stereo even if the sound track is recorded in
Dolby Digital or MPEG audio format.
Sound is noisy.
, When playing a CD with DTS sound tracks,
noise will come from the LINE 1 – TV jack or
LINE 3/DECODER jack (page 79).
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in the “Audio” setup to “Max”
(page 119).
An alternate audio track cannot be recorded or
played.
, When recording from connected equipment, set
“Line Audio Input” in OPTIONS menu to
“Bilingual” (page 74).
, Multilingual tracks (main and sub) cannot be
recorded on DVD+RWs, DVD-RWs (Video
mode), DVD+Rs, or DVD-Rs (Video mode). To
record the language, set “Bilingual Recording”
of the “DVD Rec. Settings” in the “Recording”
setup to “Main” or “Sub” before recording
(page 123). To record both the main and sub
sounds, record on DVD-RWs/DVD-Rs (VR
mode).
, Any discs other than the HDD or DVD-RWs/
DVD-Rs (VR mode) cannot be used for
recording both main and sub sounds. To record
on the HDD, set “Bilingual Recording” of the
“HDD Rec. Settings” in the “Recording” setup to
“Main+Sub” (page 123).
The recorder does not play any type of disc
(except HDD).
, The disc is upside down. Insert the disc with the
labelled side facing up.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder. In
this case, if the recorder is on, leave it on (if it is
off, leave it off) for about an hour until the
moisture evaporates.
, If the disc was recorded on a different recorder
and was not finalised, this recorder cannot play
the disc. Refer to the operating instructions
supplied with the other recorder.
The recorder does not start playback from the
beginning.
, Resume play was activated (page 77).
, You have inserted a DVD whose Title menu or
DVD menu automatically appears on the TV
screen when it is first inserted. Use the menu to
start playback.
The recorder starts playing automatically.
, The DVD VIDEO features an auto playback
function.
Playback stops automatically.
, If the DVD has an auto pause signal, the recorder
stops playback at the auto pause signal.
Some functions such as Stop, Search, or Slow-
motion Play cannot be performed.
, Depending on the DVD, you may not be able to
do some of the operations above. See the
instruction manual supplied with the disc.
The language for the sound track cannot be
changed.
, Multilingual tracks are not recorded on the DVD
being played.
, The DVD VIDEO prohibits the changing of the
language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
Playback
,continued