Alarm history clearance command, Dlp-527 – ADC Soneplex Broadband System User Manual
Page 112
ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-89
© 2000, ADC Telecommunications, Inc.
DLP-527
Page 1 of 1
ALARM HISTORY CLEARANCE COMMAND
Summary:
This procedure provides instructions for clearing alarm history and all active alarms
for the entire system.
1. Use the arrow keys to select Clear Alarm History from the Alarms menu.
2. At the Clear Alarm History selection prompt, press Enter or Return. The system displays
the following message (also shown in
Figure 527-1
):
3. Clear all alarm history by pressing Y for yes, or cancel clear alarm history by pressing
N
for no.
Stop! You have completed this procedure.
5314-A
ALARMS MENU
1. Display Active Alarms
2. Display Alarm Summary
3. Display Alarm History
4. Clear Alarm History
5. vel
Press CONTROL-A For Assistance
6. Deleting all ALARM HISTORY...
Are You Sure? (y/n)
Figure 527-1. Delete Alarm History Query
Deleting all ALARM HISTORY. . .
Are You Sure? (y/n)