ADC Soneplex Broadband System - Manual (Page 173)

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-150
© 2000, ADC Telecommunications, Inc.
DLP-543
Page 1 of 1
ALARM SUMMARY DISPLAY
Summary: Use this command to display a summary of the current alarms for the Soneplex
Broadband chassis selected.
Note: Press CONTROL-A for help information about moving around and editing fields.
Note: Pressing the “R” key clears the screen and displays only the current alarm status.
1. Use the arrow keys to select Alarms from the Main Menu. Press Enter or Return.
2. Use the arrow keys to select Display Alarm Summary from the Alarms menu. Press Enter
or Return. A Display Alarm Summary screen is shown in Figure 543-1 .
Note: Each time the shelf status changes, the screen is updated. When the screen is full,
the oldest status line scrolls off the screen.
Stop! You have completed this procedure.
ALARM SUMMARY
Legend:
---------
- No Alarm L=Local Equipment R=Remote Equipment/Facility H=Housekeeping
* Alarm(s) F=Local Facility M=Multiple
Shelf Mux Low Speed Units (Group-Slot)
============= === ==================================
H R P A M M 1- 2- 3- 4- 5- 6- 7-
C M M S E W C X X ---- ---- ---- ---- ---- ---- ----
Date Time R J N K M R O W P 1234 1234 1234 1234 1234 1234 1234
======== ======== = = = = = = = = = ==== ==== ==== ==== ==== ==== ====
01/04/95 04:29:23 - * - - - * * L
Press CONTROL-A For Assistance
6676-B
- -
Figure 543-1. Alarm Summary Screen (Typical)