ADC Soneplex Broadband System - Manual (Page 152)

ADCP-61-471 • Issue 4 • June 2000 • Section 2: Operation and Maintenance
2-129
© 2000, ADC Telecommunications, Inc.
DLP-540
Page 1 of 1
INVENTORY DISPLAY
Summary: This procedure provides instructions for displaying inventory information for the
modules installed in the Soneplex Broadband chassis and modules installed at the remote
locations. The inventory displayed is current at the time the request is made. A valid inventory
display may not be available for up to a minute after the initial MPU startup.
Note: Press CONTROL-A for help information about moving around and editing fields.
1. Use the arrow keys to select System Maintenance from the Main Menu. Press Enter or
Return.
2. Use the arrow keys to select Display Inventory from the System Maintenance Menu. Press
Enter or Return. The Inventory Status screen is shown in Figure 540-1 .
Stop! You have completed this procedure.
6766-B
INVENTORY STATUS
TID: ADC
Unit Part ADC Catalog Serial Date S/W CLEI
Identifier Number Number Number Code Version Code
===================== ========== ============ ========== ==== ======= ==========
MPU W/ BOOT CODE 2.0
MPU APPLICATION S/W 5.0
DS3MUX WORKING NO DATA PRESENT
PROTECT NO DATA PRESENT
LIU-1-1 LOCAL NO DATA PRESENT
REMOTE NO DATA PRESENT
LIU-1-2 LOCAL NO DATA PRESENT
REMOTE NO DATA PRESENT
LIU-1-3 LOCAL NO DATA PRESENT
REMOTE NO DATA PRESENT
LIU-1-4 LOCAL NO DATA PRESENT
Page 1 of 6 Press CONTROL-A for assistance
Figure 540-1. Inventory Status Screen (Typical)