Rockwell Automation 193-EC4 EC4 Current Monitoring Relay User Manual - Manual (Page 145)

146 Rockwell Automation Publication 193-UM011A-EN-P - September 2010
Appendix B DeviceNet Information
Logic Supervisor Object -
CLASS CODE 0x030E A single instance (instance 1) will be supported. The following instance
attributes will be supported.
The following common services will be implemented for the Logic Supervisor
Object.
Status Object - CLASS
CODE 0x0375 The following instance attributes are for the EC4 Current Monitoring Relay:
28 Jam 112 L3Overcurrent
60 Hardware / Config Flt
62 Non-Volatile Memory
Table 65 - ODVA Fault Codes
Trip Code Description Trip Code Description
Table 1: Logic Supervisor Object Instance Attributes
Attribute ID Access
Rule Name Data Type Range Value
1 Get/Set Logic Enable BOOL
0=Logic
Disabled
1=Logic
Enabled
0
2 Get Data Table
Array of
BYTE The Standard
Bit Table
0
5 Get Last Error UDINT
Last error
code
65
6 Get
FB Classes
Implemented
STRUCT of:
USINT
Array of
UINT
4
775, 776,
777, 778
0x3F
Table 2: Logic Supervisor Object Common Services
Service
Code Implemented for: Service
Name
Class Instance
0x08 No Yes Reset
0x0E No Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Table 3: EC4 Status Object Instance Attributes
Attribute Name Byte Data
1 Phase / Gnd Currents
0
L1 Current
1
2
L2 Current
3
4
L3 Current
5
6
Ground Current
7