Rockwell Automation 193-EC4 EC4 Current Monitoring Relay User Manual - Manual (Page 3)

Rockwell Automation Publication 193-UM011A-EN-P - September 2010 3
Preface
Manual Objectives The purpose of this manual is to provide you with the necessary information to
apply the EC4 Current Monitoring Relay with DeviceNet communications.
Described in this manual are methods for installing, configuring, and
troubleshooting.
Who Should Use This
Manual This manual is intended for qualified personnel responsible for setting up and
servicing these devices. You must have previous experience with and a basic
understanding of communications technology, configuration procedures,
required equipment, and safety precautions.
To make efficient use of the EC4 Current Monitoring Relay, you must be able to
program and operate devices with communications and have a basic
understanding of the EC4 Current Monitoring Relay’s parameter settings and
functions. You should also understand DeviceNet network operations, including
how slave devices operate on the network and communicate with a DeviceNet
master.
Conventions Parameter names are shown in italic typeface.
Reference Manuals For SLC 500 and 1747-SDN information:
• DeviceNet Scanner Module Installation Instructions Publication
1747-IN058E-EN-P
• DeviceNet Scanner Module User Manual Publication
1747-UM655B-EN-P
For PLC5 and 1771-SDN information:
• DeviceNet Scanner Module Installation Instructions Publication 1771-5.14
• DeviceNet Scanner Module Configuration Manual Publication
1771-6.5.118
For MicroLogix/CompactLogic and 1769-ADN information:
• DeviceNet Module Installation Instructions Publication
1769-IN001B-EN-P
• DeviceNet Module User Manual Publication 1769-UM001B-EN-P
For ControlLogic and 1756-DNB information:
• DeviceNet Module Installation Instructions Publication
1756-IN566C-EN-P
• DeviceNet Module User Manual Publication DNET-UM004A-EN-P
IMPORTANT Read this manual in its entirety before installing, operating, servicing,
or initializing the EC4 Current Monitoring Relay.