Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 12)

Publication 1404-UM001D-EN-E - October 2004
1-2 Safety
Other Precautions
IMPORTANT
The relay output contacts and solid-state KYZ output
contacts on the Powermonitor 3000 may be used to
control other devices through setpoint control or
communications. The response of these outputs to a
communications failure is configurable by the user.
Be sure to evaluate the safety impact of the output
configuration on your plant or process.
ATTENTION
Electrostatic discharge can damage integrated circuits
or semiconductors. Follow these guidelines when
you handle the module.
• Touch a grounded object to discharge static
potential.
• Wear an approved wrist strap-grounding device.
• Do not open the module or attempt to service
internal components.
• If available, use a static safe workstation.
• When not in use, keep the module in its static
shield bag.