Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 User Manual
Page 185
Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 Data Tables A-11
4
40305
Device address
1 to 247
-
(1)
Identifies the device on a multi-drop network. 0 is typically
used by the DF1 master. 255 is the broadcast address
5
40306
Data format
0 to 2
-
0
Parity, number of data bits, number of stop bits
0 = No parity, 8 data bits, 1 stop bit
1 = Odd parity, 8 data bits, 1 stop bit
2 = Even parity, 8 data bits, 1 stop bit
6
40307
Inter-Character
Timeout
0 to 6553 mS
0
Specifies the minimum delay between characters that
indicates the end of a message packet. 0 = 3.5 character
times.
(1) The default address is the ‘Device ID’, which is factory assigned and is found on the label on the side of the master module. The device ID is incremented for each device.
Element
No.
Modbus
Address
Element name
Range
Units Default
Value
Comment