Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 User Manual, PRIOR to Firmware rev. 3.0 - Manual (Page 327)

Publication 1404-UM001D-EN-E - October 2004
Powermonitor 3000 ControlNet Device Profile G-3
Common Services
Get Attribute All Service
The Get Attribute All service returns a concatenation of all class or
instance attributes.
Reset Service
The reset service accepts the following request parameter:
1. Request Parameters
Major Revision USINT
Minor Revision USINT
0x05 Get Status WORD
0x06 Get Serial Number UDINT
0x07 Get Product Name SHORT_STRING
Table G.4 Instance Attributes
Attr
ID Acces
s Name Data Type
Table G.5 Common Services
Service
Code Class/Instance Usage Service Name
0x01 Class/Instance Get_Attributes_All
0x05 Instance Reset
0x0E Instance Get_Attribute_Single
Table G.6 Reset Service
Parameter Data Type Description
Type USINT Type of Reset to perform