ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 102)

Parameter Settings 6-3
Language selection
Select the desired language using the arrow keys, and then press Enter to confirm.
Initiate a system reset prior to each initial startup to reset the unit
to the factory default settings. This helps prevent errors that can
occur based on improper settings.
During a full reset, the unit loses any custom parameters and
restores the factory default parameters.
After the language has been selected, the unit checks the battery status to calculate the
remaining battery life. Indicate whether the battery in use has been freshly charged by
selecting YES or NO. The current battery voltage displays in the top line.
Request battery full
The unit allows you to initiate the Start Assistant after checking the battery status.