ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 104)

Parameter Settings 6-5
Selecting medium pollution
Name
ADS recommends managing and defining location names based on the names
referenced in the respective documentation. Location names may contain up to 21
letters. The method used for setting the name is similar to the method used for
entering text in a cell phone (e.g., SMS).
Modifying the name of the measurement location
Channel Shapes/Channel Geometry
Select the shape of the pipe/channel using the left and right arrow keys and confirm
by selecting ENTER. Choose from the following standard profiles (according to
ATV A110):
• Pipe (round or ellipse)
• Egg (standard; h:w = 1.5:1)
• Rectangle
• U-Profile
• Trapezoid A = f (h, b)
• 2r Egg (h:w = 1:1)
• NPP (Pipe Profiler)
It is also possible to subdivide the pipe into special profiles, such as Q = f (h), A = f
(h), three-part profiles, and two-part profiles. Confirm by selecting ENTER and
typing in the corresponding channel dimensions.