ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 107)

6-8 ADS Portable FlowShark Pulse Manual
Storage Mode
Set the storage cycle for the compact flash card at a rate from 1 to 60 minutes.
Changing the storage cycle
Save New Values
The unit will prompt you to either save all the values or ignore the selections before
finishing the start assistant. Reject all values by selecting NO at the end of the
parameter setting procedure. You can browse through all the values again in the Start
Assistant by selecting the BACK function. This enables you to modify settings you
may have overlooked without saving previously modified settings. Selecting YES
prompts you to enter the PIN, which saves all the values and starts the unit.
Saving new values
Erasing Flash