ADS Environmental Services Portable FlowShark Pulse QR 775006 A2 - Manual (Page 38)

C H A P T E R 3
Installation
Reading and following the installation instructions before initial start-up will help
ensure success in flow measurement and device configuration. Do not power up the
transmitter or initiate start-up until installation is complete and verified. If any
problems occur during installation, connection, or configuration, please contact ADS
Client Services at
[email protected] or (877) 237-9585.
Installations should be performed only by qualified personnel according to all
statutory standards, regulations, and technical rulings. During installation, refer to all
local regulations regarding electronic equipment.
Use the Portable FlowShark Pulse and sensors only in accordance
with the design of the system for flow detection. Do not install the
equipment in an improper or unsuitable manner or select an
inappropriate or hydraulically problematic measurement location.
These may result in erroneous or insufficient measurement data
that is unsuitable for further processing and analysis.
A comprehensive understanding of hydraulic conditions is essential
to properly analyzing the data and conducting further data
processing.